Meehan 240 HyFlex Instructions

MB240 HyFlex room is outfitted with technology that allows for remote instruction and lecture capture. The HyFlex room has a pan/tilt/zoom camera

and ceiling microphones connected to the main computer in the room, which can be used with Zoom or Panopto.  

HyFlex Equipment with Projector

Using Zoom

Log into Zoom. Select Settings in the upper right-hand corner of the screen.

1. On left-hand column of the screen, select Video 

2. From the drop-down menu next to Camera in the center of the screen, select Quick Connect USB.

3. On the left-hand side of the screen, select Audio.

4. From the drop-down menu next to Speaker select Same As System. To verify the speaker is working properly, select Test Speaker. You should hear audio after this button is selected. The volume control should be to the right. 
5. From the drop-down menu next to Microphone select Line (DMP128 Plus USB#2). To verify the microphone is working properly, select Test Mic. Say something to test. After you pause you should hear what you said from the speaker. 

Camera Presets

1. To adjust the camera setting select Camera on the touch panel located at the bottom - center There are 3 preset settings for the camera. 

2. To navigate the camera to a different position you can pan, tilt and zoom.  To pan the camera, select the left or right directional control button to tilt the camera, select the up or down directional control button.  To zoom in or out, select  (+) button or the  (-) button. 

Using Panopto

1. Log into Panopto. Select the Create New Recording tab in the upper left-hand corner of the screen.

2. From the drop-down menu next to Video on the left side of the screen, select Quick Connect USB.
3. From the drop-down menu next to Audio select Line (DMP128 Plus USB#2). 
4. To verify the microphone is working properly say something and you will see activity on the volume meter.  To adjust the volume, move the vertical volume control bar.