Instructions for other spaces can be found
here.
To Use the Desktop PC
- Turn on the mini-PC located behind the monitor.
Share the PC image with the Projector
- To show the PC image on the projector, press “Display On” on the wall panel. This will lower the screen in front of the whiteboard and turn the projector on.
- The button will flash while the projector warms up. By default, the desktop computer is connected to the projector.
- Press and hold
to decrease volume. It will flash.
- Press and hold
to increase volume. It will flash.
How to Connect Laptop to Projector & Speakers
- If you want to use a laptop instead, connect the HDMI cable at the right side of the lectern into your laptop and the projector will automatically switch to your laptop.
- To go back to desktop, unplug the HDMI from the laptop.
How to Connect Doc Camera to Projector
- Power ON the Doc Camera and it will automatically connect to the projector.
- To go back to the other source, power off the Doc Camera.
Shutting Down Projector & Raising the Screen
- On the control switch, press and release the OFF button. The display OFF light will flash while the projector cools down.
- NOTE: You will not be able to restart the system until the projector cools down (and the OFF light stops flashing). This will take approximately 30 seconds.
