Sally Blair Ames 120 Instructions

Display Laptop

  1. Connect the VGA cable or HDMI cable to your laptop. Please note, if you are using a Mac laptop, you may need to use your VGA adaptor.  If you need audio from your laptop, please connect the audio cable to the headphone jack on your laptop.

  1. Turn on your laptop. 
  2. On the panel, press the HDMI or VGA button and the laptop image should display on the screen.

Troubleshooting Laptop Display                                

If you do not get a picture on both your laptop and the projector screen

  • Windows - hold down the following laptop keys simultaneously.  The “Windows” key located on the bottom left of the keyboard and the letter "P" key, and make sure the setting is set to "Duplicate"
  • Mac OS X - navigate to System Preferences > Displays > Arrangement and then check off Mirror Displays.

Shut Down

  1. Press the OFF button on the panel. The display OFF light will flash while the projector cools down. NOTE: You will not be able to restart the system until the projector cools down (and the OFF light stops flashing). This will take approximately 2 minutes.
Was this helpful?
0 reviews

Details

Article ID: 118007
Created
Thu 10/8/20 5:57 PM
Modified
Fri 7/9/21 10:44 AM