Hemingway Theater Instructions

If you're looking for a different event space, please CLICK HERE.

  1. Connect the VGA Cable with the audio connector into the VGA port on the Extron Wall Panel located on the left of the stage.
  2. Connect the other end of the VGA cable to your laptop. 
  3. Connect the stereo mini audio cable to the headphone out port on your laptop if you need audio and into the corresponding audio port on the wall panel.
  4. Turn the projector on by pressing the ON button, located on the Extron Wall Panel. The projector will take a few minutes to power up.
  5. Lower the screen into position by pressing SCREEN on the wall panel.
  6. Make sure your laptop is set at a resolution of 1024 x 768 for the proper size from the projector.
  7. Once you are finished with your presentation, press the OFF button and the projector will start power down. 
  8. Raise the screen back to the ceiling using the wall switch.
  9. Disconnect your laptop and ensure everything is off.
Was this helpful?
0 reviews


Article ID: 42359
Fri 11/10/17 4:03 PM
Thu 6/10/21 11:34 AM