Martin Auditorium Instructions

If you're looking for a different event space, please CLICK HERE.

  1. For laptop use, connect the VGA or HDMI cable to your laptop.

  • If you are using a Mac laptop, you will need to use your VGA adapter
  • Plug the Ethernet cable into your laptop for Internet connectivity.

2. If you need audio from your laptop, connect the audio cable to the headphone jack on your laptop.

3. Plug your laptop's power cord into the power socket located on the top left side of the podium.

4. Press anywhere on the touch screen located on the podium.

5. Under Sources, select the source you would like to project.

6. Under Room Controls, press the Screen Down button to lower the screen.

  • Adjust the volume of the room speakers by pressing the up/down Program Volume buttons.  
  • Adjust the volume of the lectern microphone by pressing the Speech Volume buttons. 
  • If you want to blank out the image on the screen, press Image Mute.  For the image to return to the screen, press Image Mute. 
  • After each use, please remember to press the Screen Up button.

7.  When you are done with your event, press the Shutdown button, then Yes.

Troubleshooting Laptop Mirroring

If you do not get a picture on both your laptop and the projector screen:

  • Windows - hold down the following laptop keys simultaneously: 
  • Mac OS X - navigate to System Preferences > Displays > Arrangement and then check off Mirror Displays.
Was this helpful?
0 reviews


Article ID: 42362
Fri 11/10/17 4:04 PM
Thu 6/10/21 11:31 AM