Merkert Tracy 250/251 Instructions

If you're looking for a different event space, please CLICK HERE.

  1. Each room, Merkert Tracy 250 and Merkert Tracy 251 has a control panel that controls the projector for that room. You can also control the projector in both rooms from each panel. It's located on the wall, near the door. Press the ON button on the panel. The screen will automatically come down and the projector will startup.

Display Laptop

  1. Connect the VGA cable to your laptop.
  2. Plug your laptop's power cord into the power socket located in the floor panel next to the VGA port.

  1. Turn on your laptop.
  • If you want to project your laptop to only one screen, click on 1, on the Extron control panel
  • If you want to project your laptop on both screens in 250/251, click on the 2, on the Extron control panel.

  1. Once you are done, turn off your laptop and press the OFF button on the control panel.


If you do not get a picture on both your laptop and the projector screen:

On Windows, hold down the following laptop keys simultaneously:

  • The (Fn) key located on the bottom left of the keyboard, and...
  • The corresponding monitor “F” key located across the top of the keyboard. The specific “F” key varies on laptops, therefore look for the ”F” key displaying two monitor symbols or labeled (LCD/CRT).

On Mac OS X, tap down the ”F” key displaying two monitor symbols (usually the F7). 

Was this helpful?
0 reviews


Article ID: 42363
Fri 11/10/17 4:05 PM
Thu 6/10/21 11:29 AM